You are here: Home » Topic » Thecus N2100; firefly dosn’t autostart

Thecus N2100; firefly dosn’t autostart

This topic contains 1 reply, has 2 voices, and was last updated by  fizze 9 years, 4 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #2372

    gbdennis
    Participant

    Hi, I have a thecus n2100 running firefly 1.4.0.2.

    For some reason (maybe my trinkering!) it dosn’t autostart, so I either have tog o into the web front end and enable the module or ssh to the box and launch mt-daapd.

    Any clues how I can fix this?

    Cheers,
    Dennis

    #16805

    fizze
    Participant

    Quick googling revealed using the META module provides a workaround:
    http://thecususergroup.proboards106.com/index.cgi?board=n5200modifications&action=display&thread=2209&page=1

    Whatever that may be 😉

    Feh schmeh to developers that use a wonderful open linux system and then put /etc/init.d on a read-only fs. 😡

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.