You are here: Home » Topic » Problem with Firefly on Maxtor Shared Storage

Problem with Firefly on Maxtor Shared Storage

This topic contains 1 reply, has 1 voice, and was last updated by  rpedde 10 years, 5 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #1341

    bigpete

    Hi.
    I recently installed OpenMSS and Firefly according to the user guide here: http://wiki.fireflymediaserver.org/MSS_Installation

    When I come to the point where I shall type # /opt/etc/init.d/S60mt-daapd I get the following error:

    # /opt/etc/init.d/S60mt-daapd
    pidof: not found
    BusyBox v1.00-pre2 (2006.02.01-23:21+0000) multi-call binary

    Usage: sleep N

    mt-daapd.conf: applet not found
    #

    Does someone have suggestions to what I can do to fix this?

    #10428

    rpedde
    Participant

    @bigpete wrote:

    Hi.
    I recently installed OpenMSS and Firefly according to the user guide here: http://wiki.fireflymediaserver.org/MSS_Installation

    When I come to the point where I shall type # /opt/etc/init.d/S60mt-daapd I get the following error:

    # /opt/etc/init.d/S60mt-daapd
    pidof: not found
    BusyBox v1.00-pre2 (2006.02.01-23:21+0000) multi-call binary

    Usage: sleep N

    mt-daapd.conf: applet not found
    #

    I think it’s possible that when you edited the startup script you didn’t put the changes all on one line. I’m thinking possibly you have a carriage return in there after the “-c” and before the “mt-daapd.conf”.

    Try putting your point right on the start of “mt-daapd.conf” in that file (/opt/etc/init.d/s60mt-daapd), and deleting until you run into the -c. Then add a space back. Then save the file.

    — Ron

    Does someone have suggestions to what I can do to fix this?

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.