FireFly Media Server › Firefly Media Server Forums › Firefly Media Server › Setup Issues › Infrant ReadyNAS
- This topic has 3 replies, 3 voices, and was last updated 16 years, 4 months ago by stretch.
-
AuthorPosts
-
26/01/2007 at 1:45 AM #1035drfatalGuest
Hi,
I just installed this on an Infrant ReadyNas but can’t seem to login.
Getting prompted for a user and password which I don’t have.Any help would be appreciated.
Thanks
26/01/2007 at 4:37 AM #8714rpeddeParticipant@drfatal wrote:
Hi,
I just installed this on an Infrant ReadyNas but can’t seem to login.
Getting prompted for a user and password which I don’t have.Any help would be appreciated.
Thanks
not sure where you got the software, so I don’t know how it was configured and how it was set up, but I’d guess that any user name (admin, for example) with a password of “mt-daapd” might work.
If not, check the config file. Use any user name and the password specified as the “admin_pw” in the config file (Typically /etc/mt-daapd/mt-daapd.conf, or /opt/etc/mt-daapd/mt-daapd.conf).
— Ron
23/12/2007 at 5:05 PM #8715sebastien.pottierGuestThe configuration file is “/etc/mt-daapd.conf”.
The default pw is “netgear1”24/12/2007 at 1:54 AM #8716stretchParticipant@rpedde wrote:
not sure where you got the software, so I don’t know how it was configured and how it was set up, but I’d guess that any user name (admin, for example) with a password of “mt-daapd” might work.
If not, check the config file. Use any user name and the password specified as the “admin_pw” in the config file (Typically /etc/mt-daapd/mt-daapd.conf, or /opt/etc/mt-daapd/mt-daapd.conf).
— Ron
From Infrant. Firefly svn-1676 with some svn-1696 fixes is included with the latest firmware.
This may be of use to you Ron.
@http://www.infrant.com/forum/viewtopic.php?t=14903 wrote:Compiling natively on the ReadyNAS is slow. How about a cross-compiler?
You can grab a tarball of a cross-compiler to compile using an x86 system from here. It includes gcc, g++, and development headers, for use on Linux-based systems. Extract the tarball from your root directory to ensure things are placed in the correct path.http://www.infrant.com/download/development/readynas-cross-3.3.5.tar.gz
-
AuthorPosts
- The forum ‘Setup Issues’ is closed to new topics and replies.