index idx_path already exists

This topic contains 1 reply, has 2 voices, and was last updated by  Anonymous 7 years, 2 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #3031

    Anonymous

    I have just installed Ubuntu 9.1 and am having the problem when I run

    sudo mt-daapd -f

    Firefly Version svn-1696: Starting with debuglevel 2
    Error loading plugin /usr/lib/mt-daapd/plugins/ssc-script.so: plugin declined to load
    Plugin loaded: ssc-ffmpeg/svn-1696
    Plugin loaded: daap/svn-1696
    Plugin loaded: rsp/svn-1696
    Starting signal handler
    Starting rendezvous daemon
    Client running
    WARNING: Unhandled message: interface=org.freedesktop.DBus.Introspectable, path=/, member=Introspect
    Initializing database
    Full reload…
    Starting mp3 scan
    opendir: No such file or directory
    Query: create index idx_path on songs(path,idx)
    Error: index idx_path already exists
    Aborting

    based on the following config file

    # $Id: mt-daapd.conf.templ 1660 2007-09-12 13:08:04Z rpedde $
    #
    # This is the mt-daapd config file.
    #
    # If you have problems or questions with the format of this file,
    # direct your questions to [email protected].
    #
    # Questions and discussions about the format and content of this
    # config file can probably be obtained by consulting the wiki:
    #
    # http://wiki.fireflymediaserver.org/Config_File
    #
    # Or by asking questions on the forums at
    #
    # http://forums.fireflymediaserver.org
    #
    #

    [general]

    #
    # web_root (required)
    #
    # Location of the admin web pages.
    #
    # If you installed from .RPM, .deb, or tarball with –prefix=/usr, then
    # this is correct.
    #
    # If you installed from tarball without –prefix=/usr, then the correct
    # path is probably /usr/local/share/mt-daapd/admin-root.
    #

    web_root = /usr/share/mt-daapd/admin-root

    #
    # port (required)
    #
    # What port to listen on. It is possible to use a different
    # port, but this is the default iTunes port
    #

    port = 3689

    #
    # admin_pw (required)
    #
    # This is the password to the administrative pages
    #

    admin_pw = senior09

    #
    # db_type (required)
    #
    # This is what kind of backend database to store the song
    # info in. Valid choices are “sqlite” and “sqlite3”.
    #

    db_type = sqlite3

    #
    # db_parms
    #
    # This is any extra information the db needs to connect.
    # in the case of sqlite and sqlite3, this is the name
    # of the directory to store the database in
    #
    # If you installed from RPM or .deb, this path likely already
    # exists. If not, then you must create it. The directory itself
    # must be writable by the “runas” user.
    #

    db_parms = /var/cache/mt-daapd

    #
    # mp3_dir (required)
    #
    # Location of the mp3 files to share. Note that because the
    # files are stored in the database by inode, these must be
    # in the same physical filesystem.
    #

    mp3_dir = /home/media/music

    #
    # servername (required)
    #
    # This is both the name of the server as advertised
    # via rendezvous, and the name of the database
    # exported via DAAP. Also know as “What shows up in iTunes”.
    #

    servername = 1904

    #
    # runas (required)
    #
    # This is the user to drop privs to if running as
    # root. If mt-daapd is not started as root, this
    # configuration option is ignored. Notice that this
    # must be specified whether the server is running
    # as root or not.
    #
    # This is also ignored on Windows.
    #

    runas = jp9gz

    #
    # password (optional)
    #
    # This is the password required to listen to MP3 files
    # i.e. the password that iTunes prompts for
    #

    #password =

    #
    # extensions (optional)
    #
    # These are the file extensions that the daap server will
    # try to index and serve. By default, it only indexes and
    # serves .mp3 files. It can also server .m4a and .m4p files,
    # and just about any other files, really. Unfortunately, while
    # it can *attempt* to serve other files (.ogg?), iTunes won’t
    # play them. Perhaps this would be useful on Linux with
    # Rhythmbox, once it understands daap. (hurry up!)
    #
    # Failing that, one can use server-side conversion to transcode
    # non-standard (.ogg, .flac) music to wav on the server side.
    # See the ssc_* options below.
    #
    # To be able to index .ogg files, you’ll need to have configured
    # with –enable-oggvorbis. For .flac, –enable-flac, for .mpc,
    # –enable-musepack.
    #

    extensions = .mp3,.m4a,.m4p

    #
    # ssc_codectypes (optional)
    #
    # List of codectypes for files that the daap server should
    # perform internal format conversion and present to clients
    # as WAV files. The file extensions that these codectypes correspond
    # to must also be present in ‘extensions’
    # configuration value, or files are not probed in the first
    # place.
    #
    # Valid codectypes:
    #
    # mp4a – for AAC (.aac, .mp4, .m4a, .m4p)
    # mpeg – for mp3
    # wav – for wav
    # wma – for wma
    # ogg – for ogg
    # flac – for flac (.flac, .fla)
    # mpc for musepack (.mpc, .mpp, .mp+)
    # alac for alac (.m4a)
    #

    # Not needed because ffmpeg is enabled (all file types transcoded to wav.
    # If this behavior is undesired, see the [plugins] section and disable it,
    # or selectively disable codecs below with the never_transcode option.)
    # -joshk
    # ssc_codectypes = ogg,flac,alac

    # never_transcode (optional)
    # Comma separated list of formats to never transcode. (Nothing by default)
    # never_transcode = ogg

    #
    # ssc_prog (optional)
    #
    # Program that is used in server side format conversion.
    # Program must accept following command line syntax:
    # ssc_prog filename offset length …
    # Parameter filename is the real name of the file that is
    # to be converted and streamed, offset is number of bytes
    # that are skipped from the beginning of the _output_ file
    # before streaming is started, length is length of the song
    # in seconds (or zero). All other possible arguments must
    # be ignored. The resulting wav file (or the rest of
    # the file after initial seek) is written to the standard
    # output by the ssc_prog program. This is typically
    # a script that is a front end for different conversion tools
    # handling different formats.
    #

    # ssc_prog = /usr/bin/mt-daapd-ssc.sh

    #
    # logfile (optional)
    #
    # This is the file to log to. If this is not configured,
    # then it will log to the syslog.
    #
    # Not that the -d switch will control the log verbosity.
    # By default, it runs at log level 1. Log level 9 will churn
    # out scads of useless debugging information. Values in between
    # will vary the amount of logging you get. However, you must log
    # to a file to see this debugging information (debug information will
    # not appear in syslog.)
    #

    #logfile = /var/log/mt-daapd.log

    #
    # rescan_interval
    #
    # How often to check the file system to see if any mp3 files
    # have been added or removed.
    #
    # if not specified, the default is 0, which disables background scanning.
    #
    # If background rescanning is disabled, a scan can still be forced from the
    # “status” page of the administrative web interface
    #
    # Setting a rescan_interval lower than the time it takes to rescan
    # won’t hurt anything, it will just waste CPU, and make connect times
    # to the daap server longer.
    #
    #

    rescan_interval = 3600

    # always_scan
    #
    # The default behavior is not not do background rescans of the
    # filesystem unless there are clients connected. The thought is to
    # allow the drives to spin down unless they are in use. This might be
    # of more importance in IDE drives that aren’t designed to be run
    # 24×7. Forcing a scan through the web interface will always work
    # though, even if no users are connected.

    # always_scan = 0

    #
    # scan_type
    #
    #
    # This sets how aggressively mp3 files should be scanned to determine
    # file length. There are three values:
    #
    # 0 (Normal)
    # Just scan the first mp3 frame to try and calculate size. This will
    # be accurate for most files, but VBR files without an Xing tag will
    # probably have wildly inaccurate file times. This is the default.
    #
    # 1 (Aggressive)
    # This checks the bitrates of 10 frames in the middle of the song.
    # This will still be inaccurate for VBR files without an Xing tag,
    # but they probably won’t be quite as inaccurate as 0. This takes
    # more time, obviously, although the time hit will only happen the
    # first time you scan a particular file.
    #
    # 2 (Painfully aggressive)
    # This walks through the entire song, counting the number of frames.
    # This should result in accurate song times, but will take the most
    # time. Again, this will only have to be incurred the first time
    # the file is indexed.
    #

    scan_type = 2

    #
    # compress
    #
    # Whether to use gzip content-encoding when transferring playlists etc.
    # This was contributed as a patch by Ciamac Moallemi just prior to the 0.2.1
    # release, and as such, hasn’t gotten as much testing as other features.
    #
    # This feature should substantially speed up transfers of large databases
    # and playlists.
    #
    # It will eventually default to 1, but currently it defaults to 0.
    #

    #compress = 0

    [plugins]
    plugin_dir = /usr/lib/mt-daapd/plugins
    plugins = rsp.so,ssc-ffmpeg.so

    [scanning]

    # should playlists be processed at all?
    #
    process_playlists = 1

    # should itunes xml files be processed?
    #
    process_itunes = 1

    # should m3u files be processed?
    #
    process_m3u = 1

    Any suggestions?

    #18913

    Anonymous

    I was having this same problem. The solution for me was to change plugin_dir = /usr/lib/mt-daapd/plugins to point to /usr/share/mt-daapd/plugins as that is where the Ubuntu 9.10 apt-get installed the plugin files.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.
Register here